Our Australian Made PVC 89mm Shutters can be manufactured in as little as 10 working days (under normal circumstances). Allow some time for delivery. Serious quality at a super fast speed. Dont wait 6-8 weeks to get your shutters.
Help protect Australian jobs and buy your Shutters from Blinds on the Net, we manufacture our Shutters right here in Australia. This means if there is anything wrong with your shutters, they dont have to travel all the way back to China or be remade and wait a further 6-8 weeks to get the problem solved.
Our quality PVC shutters look just like timber shutters but have the added benefit of having a rigid aluminium core in the louvre blades, side styles and top and bottom rails which means we can make panels up to 900mm wide! Minimum panel width without frame is 230mm! Minimum panel width with frame is 250mm. However all shutters come standard with Frames. If you require a panel only please speak with a consultant for prices.
Wet area's of your home! If you require stainless steel componentry to avoid rusting in wet area's or by the sea! Please speak with consultant as there would be an additional charge required.PVC Shutters have exactly the same Thermal insulation heat transfer properties as Basswood Shutters. This means both products will insulate your home just the same. This has been independantly tested through AWTA Melbourne.
Shutter Specications
Louvre Widths 89mm only. Louvre Shape Elliptical Only. Maximum Panel Height 2600mm
Midrail required 1 midrail required for heights greater than 1500mm
2 midrails required for heights greater than 2100mm
Hinged Panel Maximum Width 900mm
Please note
Minimum top & bottom rails for panels up to 700mm wide is 76mm
Minimum top & bottom rails for panels greater than 900mm is 90mm
U Channel Maximum Panel Width 900mm
Tilt Rod Optons Hidden Only
Louvre Thickness 11mm
Stille Profile Beaded. Stile Width 50mm. Stile Thickness 27mm. Rail Thickness 19mm
Framing Options
Small L Frame (Beaded) Medium L Frame (beaded) Z Frame
T-Post 90deg Corner Post 45deg Corner Post
Light Block U Channel
Deductions
Recess Mount; Factory will deduct 3mm width and 4mm height.
Face Mount; No deductons will be taken.
Tilt Rod Type Only hidden tilt rod option available. Will be fitted to the rear of the panel on the hinge side unless specified otherwise.
Shutter panels can have split tilt mechanisms split into 2 or 3 sections without need for a midrail. Measurements from the bottom of the panels are required.
Tilt rods will automatically be split at approximately 1000mm. Louvres Only 89mm elliptical shape available. These are available in the solid PVC with an Aluminium Core.
To assist with measuring the following information shows the minimum reveal clearance required by louver. 89mm – 66mm clearance
Hinging Details The factory default matches are as follows: White, Alpine White & Ivory Off White: Vanilla Silver & Stainless Steel hinges are available on request
See following for 'How to Measure Plantation Shutters'