Slimline Venetians Installation Guide

NOTE: It will be easier to install larger blinds with two people.

Inside RECESS mount:

Your Wood Venetian blinds will come with installation brackets for installing your Wood Venetian or Greenwood venetian blind. Always handle your blind by the metal head rail.

1. Place your brackets about 100mm from each end and then evenly throughout the length of the blind on longer blinds. Please make sure that your middle brackets do not interfere with the internal workings of the head rail.
2. Drill one screw per bracket through each bracket and into the top of the window frame.
3. Holding the blind from underneath the head rail, hook the front lip of the head rail over the entire working of the bracket and hold the head rail at a slight downward angle.
4. Now push your head rail towards the window (it is spring loaded) and then lift the back of the head rail flush with the front in one continuous motion and let it clip into place. This will hook the head rail under the rear lip of the bracket. This may need to be repeated along the blind if your blind is quite large.
5. Now your blind is installed correctly. To operate, pull toward the middle (this will unlock the cord lock) and move the cord back into the vertical position and slowly release the cord. To lock your blind off before it is all the way down, simply angle the cords to the outer side of the blind and release the cord.
6. Lastly attach the child safety device to make sure the cords are kept out of reach for children.

NOTE: When operating you blinds up and down, always have cord hanging straight down to avoid cord damage.

Outside FACE mount:

1. Place your brackets about 100mm from each end and then evenly throughout the length of the blind on longer blinds. Please make sure that your middle brackets do not interfere with the internal workings of the head rail.
2. Drill one screw per bracket through each bracket and into the top of the window frame.
3. Holding the blind from underneath the head rail, hook the front lip of the head rail over the entire working of the bracket and hold the head rail at a slight downward angle.
4. Now push your head rail back towards the window (it is spring loaded) and then lift the back of the head rail flush with the front in one continuous motion and let it clip into place. This will hook the head rail under the rear lip of the bracket. This may need to be repeated along the blind if your blind is quite large.
5. Now your blind is installed correctly. To operate, pull toward the middle (this will unlock the cord lock) and move the cord back into the vertical position and slowly release the cord. To lock your blind off before it is all the way down, simply angle the cords to the outer side of the blind and release the cord.
6. Lastly attach the child safety device to make sure the cords are kept out of reach for children.

NOTE: When operating you blinds up and down, always have cord hanging straight down to avoid cord damage.

Trustpilot