|
Wood Venetians and Green Wood Venetian Installation Guide
Wood Venetians (46mm Cedar, 50mm Basswood)
NOTE: It will be easier to install larger blinds with two people.
Inside RECESS mount:
Your Wood Venetian blinds will come with installation brackets for installing your Wood Venetian or Greenwood venetian blind. Always handle your blind by the metal head rail.
- Place your valance to one side, it will be installed last.
- Your box brackets are marked with an ?L? for Left and ?R? fro Right and must be installed with the hinged flap at the top facing out.
- The brackets can be side fixed or top fixed. Place 2 screws into each bracket for a secure fix.
- On larger blinds, a centre support bracket may be required. Install 2 screws into this bracket to secure to window frame. You may need to offset this bracket so it doesn?t interfere with the ladder strings.
- Open the flap and insert the metal head rail into each bracket and then close the flaps until you hear it clip into place.
- Lastly attach the child safety device to make sure the cords are kept out of reach for children.
- Now install you valance and your blind is installed correctly. To operate, pull toward the middle (this will unlock the cord lock) and move the cord back into the vertical position and slowly release the cord. To lock your blind off before it is all the way down, simply angle the cords to the outer side of the blind and release the cord.
NOTE: When operating you blinds up and down, always have cord hanging straight down to avoid cord damage.
Outside FACE mount:
Your Wood Venetian blinds will come with installation brackets for installing your Wood Venetian or Greenwood venetian blind. Always handle your blind by the metal head rail.
- Place your valance to one side, it will be installed last.
- Your box brackets are marked with an ?L? for Left and ?R? fro Right and must be installed with the hinged flap at the top facing out.
- On larger blinds, a centre support bracket may be required. Install 2 screws into this bracket to secure to window frame. You may need to offset this bracket so it doesn?t interfere with the ladder strings.
- Place your brackets on the top edge of your architrave and mark with the holes with a pencil.
- Pre-drilling 2mm holes at the pencil mark position may make life easier.
- Drill your brackets into place, open the flaps and place your venetian blinds head rail into place.
- Close the flaps and make sure you hear them ?click? into place. This means it will be securely locked into place.
- Lastly attach the child safety device to make sure the cords are kept out of reach for children.
- Now install you valance and your blind is installed correctly. To operate, pull toward the middle (this will unlock the cord lock) and move the cord back into the vertical position and slowly release the cord. To lock your blind off before it is all the way down, simply angle the cords the outer side of the blind and release the cord.
NOTE: When operating you blinds up and down, always have cord hanging straight down to avoid cord damage.
|